jliechty
June 6th, 2005, 08:05 AM
Thanks. I will go back and reshoot this and experiment a bit. The scene wasn't lit by harsh light - high cloud as I recall. I actually deepended the shadows intentionally in the PS CS2 RAW converter - the original wasn't as contrasty. What is interesting is that while the actual exposure of the blown area should be well within tolerances (If I were still shooting B&W film I would have guessed it at around zone 8) it is just the one colour that is blown - and yellow is not one of the 3 channels so it must have actualy been 2 colours. I will have to keep an eye on my histogram display because I don't have the $ for a 1DSMkII!
Digital SLRs are like slide film - the dynamic range is more limited than negative film. FWIW, when you end up with detail-less yellows, the red channel is probably the one that has blown. Good luck with your tests. :)
Digital SLRs are like slide film - the dynamic range is more limited than negative film. FWIW, when you end up with detail-less yellows, the red channel is probably the one that has blown. Good luck with your tests. :)
wallpaper girlfriend Orchid iPhone 4 wallpaper orchid wallpaper.
seahawks
03-27 12:54 AM
you can volunteer for your future employer as long as there is no financial transactions involved.
GCOP
01-08 03:51 PM
If you have already sent passport along with I-94, don't worry. They will return your Old passport with I-94 & New passport.
i did not remove the i-94's and have already sent the passport for renewal. i do have a scanned copy of the i-94's. is there anything i can do at this point to get back the i-94's? i hope this does not pose a problem when i plan to travel outside the US. any advice is much appreciated.
i did not remove the i-94's and have already sent the passport for renewal. i do have a scanned copy of the i-94's. is there anything i can do at this point to get back the i-94's? i hope this does not pose a problem when i plan to travel outside the US. any advice is much appreciated.
2011 Yellow orchid wallpaper
zCool
04-01 02:27 PM
Yes, at the time of adjudication, you will need employment varification letter that shows Permenent Full time job with same or similar duties and reasonable wage difference.
more...
GCBy3000
11-09 03:32 PM
Does anyone have exact idea on what is meant my PD portability. I have my i140 approved on locaiton A. Then I moved to location B and started a new labor and filed for 140 last month.
There was no mention in my second 140 about the old PD. When does exactly I have to mention that I have a PD to use. Is this in 485 stage? When I checked with my attorney he said, I have now two PDs and I can use any of them. But when and how I dont know?
There was no mention in my second 140 about the old PD. When does exactly I have to mention that I have a PD to use. Is this in 485 stage? When I checked with my attorney he said, I have now two PDs and I can use any of them. But when and how I dont know?
snathan
08-18 05:08 PM
No, not correct. Since she got a new I-94 her status changed to H1 w.e.f October 1, 2008.
However, because she did not work she is currently out of status. She will have to change her status back to H4 either by going out of country and re-entering with H4 visa or filing I-539.
She can correct the status by going out of the country. But any time USCIS can ask for the pay stub for that period during the GC process. If you are not able to provide the Paystub, your GC will be in soup. So the best would be to ge the pay stub.
Thanks.
However, because she did not work she is currently out of status. She will have to change her status back to H4 either by going out of country and re-entering with H4 visa or filing I-539.
She can correct the status by going out of the country. But any time USCIS can ask for the pay stub for that period during the GC process. If you are not able to provide the Paystub, your GC will be in soup. So the best would be to ge the pay stub.
Thanks.
more...
sprash
05-06 01:30 PM
Is SBI still the best one around?
Thanks!
Thanks!
2010 orchid wallpaper. orchid
Ramg
04-09 09:54 PM
Dear All,
We have applied for our 485 in August 07 with myself as Primary applicant and my wife as dependent. My wife later got her H1B in october but we haven't updated her status as H1b to USCIS in the 485 processing. Recently we moved to a new place and wanted to change the address online. I suppose I and my wife have to fill the Ar-11 form individually. When trying to fill for my wife, I got some questions.
Please clarify:
1. I am in the United States as a ___ (Should this blank be filled with H4 or H1B for my wife? If I say H1b will there be any problem as I added her to my GC process as a H4. Also, should her employer details be given in the form?
2. Copy number from Alien card? Is this the I-94 number or passport number or alien number on the finger printing sheet?
3. If not a permanent resident, my stay in US expires on ____ (Should this be the same date as her H1B end date?)
I really appreciate any help on these questions at the earliest. It will be 10th day tomm. after moving into new place and I just noticed that the form ar-11 says that USCIS must be notified of address change within 10 days of moving.
Please help me clarify these questions.
Thank you,
Ramg
We have applied for our 485 in August 07 with myself as Primary applicant and my wife as dependent. My wife later got her H1B in october but we haven't updated her status as H1b to USCIS in the 485 processing. Recently we moved to a new place and wanted to change the address online. I suppose I and my wife have to fill the Ar-11 form individually. When trying to fill for my wife, I got some questions.
Please clarify:
1. I am in the United States as a ___ (Should this blank be filled with H4 or H1B for my wife? If I say H1b will there be any problem as I added her to my GC process as a H4. Also, should her employer details be given in the form?
2. Copy number from Alien card? Is this the I-94 number or passport number or alien number on the finger printing sheet?
3. If not a permanent resident, my stay in US expires on ____ (Should this be the same date as her H1B end date?)
I really appreciate any help on these questions at the earliest. It will be 10th day tomm. after moving into new place and I just noticed that the form ar-11 says that USCIS must be notified of address change within 10 days of moving.
Please help me clarify these questions.
Thank you,
Ramg
more...
estrela21
02-08 11:52 PM
As gsc999 said peoples here mostly know about "Employment Based GC" not much about "Family Based GC" .... Still few questions if we can guide you to the right place...
a) What is your current Immigration Status ?
b) Do you have SSN ?
c) Forget about he goes to Jail/not is it impossible to get your "Marriage Certified" or at least put the Application before March 31st ? You have almost 51 days ...Based on that a lawyer can guide you but if you dont have a Marriage Certficate no one can really help... You know !
d) Lets the Justice system decide he goes to Jail or not but if unfortunately he is convicted and goes to Jail for 18 months do you want to live/continue your marriage with him after he comes out ?
e) Based on Marriage with US Citizen they give you "conditional GC" - and they would verify after 2-3 years if your marriage is a "Bonafide Marriage" etc... and then only give you a "unconditional GC"
That's why you will see those fake "immigration marriage" start giving problem after 2-3 years and end up in mutual Divorce. Be cautious about converting you GC to a regular "unconditional GC" .
Good Luck !
thank you....so much
a) What is your current Immigration Status ?
b) Do you have SSN ?
c) Forget about he goes to Jail/not is it impossible to get your "Marriage Certified" or at least put the Application before March 31st ? You have almost 51 days ...Based on that a lawyer can guide you but if you dont have a Marriage Certficate no one can really help... You know !
d) Lets the Justice system decide he goes to Jail or not but if unfortunately he is convicted and goes to Jail for 18 months do you want to live/continue your marriage with him after he comes out ?
e) Based on Marriage with US Citizen they give you "conditional GC" - and they would verify after 2-3 years if your marriage is a "Bonafide Marriage" etc... and then only give you a "unconditional GC"
That's why you will see those fake "immigration marriage" start giving problem after 2-3 years and end up in mutual Divorce. Be cautious about converting you GC to a regular "unconditional GC" .
Good Luck !
thank you....so much
hair Wallpaper picture of a purple
gxr
10-01 03:29 PM
Anyone with Oct 06 or earlier RD still waiting for I-140 approval?
more...
chantu
06-15 09:26 AM
What if H1-B extension is for last 3 years of total 6 years? It means,my first 3 years are ending in nov 07, and if I file 485, will I get 3 years of extension or 1 yr extension?
hot Orchid Wallpaper Deluxe
pkv
09-13 01:17 PM
What is this fight all about ??? eb3-->eb2 ... or spillover??? changing any/both of them will not solve underlying problem.. Grow up people
why not go for real problem??? if you want to ask congress/administration, ask for some real solutions which will help everyone. To name a few...
1. Capture lost Visa numbers
2. Get rid of country quota.. how does this country based quota makes sense in EB Category??
why not go for real problem??? if you want to ask congress/administration, ask for some real solutions which will help everyone. To name a few...
1. Capture lost Visa numbers
2. Get rid of country quota.. how does this country based quota makes sense in EB Category??
more...
house White and Pink Orchid
fide_champ
08-04 06:50 PM
Hi,
Thanks , for point 3 , I can apply for premium COS with future date as effective(say 6 weeks from now) , I will know on approval within 2 weeks since its a premium n then i can get my family here since I know for sure L1-H1 is approved , this will avoid family either going to stamping at chennai or every one (all of us) leaving back to india due to non approval of COS. But now Major question is , if I apply for premium COS will it be possible to include dependents COS as well in the same request , with dependents currently being in India ? or if i were to apply COS for them after they are here , will it be same cost n procedure as mine (COS that was successfully processed just for myself)?
You cannot do a COS for them while they are in india. It would be better if you can apply COS for all including yourself at the sametime to avoid complications. Basically the COS for your family must be applied before your COS gets approved. I suggest you speak with a lawyer for exact interpretation of rules.
Thanks , for point 3 , I can apply for premium COS with future date as effective(say 6 weeks from now) , I will know on approval within 2 weeks since its a premium n then i can get my family here since I know for sure L1-H1 is approved , this will avoid family either going to stamping at chennai or every one (all of us) leaving back to india due to non approval of COS. But now Major question is , if I apply for premium COS will it be possible to include dependents COS as well in the same request , with dependents currently being in India ? or if i were to apply COS for them after they are here , will it be same cost n procedure as mine (COS that was successfully processed just for myself)?
You cannot do a COS for them while they are in india. It would be better if you can apply COS for all including yourself at the sametime to avoid complications. Basically the COS for your family must be applied before your COS gets approved. I suggest you speak with a lawyer for exact interpretation of rules.
tattoo Free Yellow Orchid Wallpapers
Curious_Techie
09-30 10:54 AM
Yes NSC with WAC receipt.
EB2-I PD Aug 2005.
I did applied for EAD & AP renewal in mid August.
Still on H1B. 2010 validity
EB2-I PD Aug 2005.
I did applied for EAD & AP renewal in mid August.
Still on H1B. 2010 validity
more...
pictures Orchid iPhone 4 wallpaper
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
dresses Orchid Wallpaper at 800x600
americandesi
06-17 11:48 PM
There is an option in US Greencard called “Commuter Permanent Resident Card”. Refer the link below for more details
http://www.lanepowell.com/pressroom/pubs/pdfold/bc_2002_0005.pdf
This GC allows you to live in Canada/Mexico and commute to United States for work. Though you are loosing the year count towards US Citizenship with this GC, I think it’s a better option for anyone who wants to apply for citizenship in both countries.
(ie) Convert the regular Permanent resident card to “Commuter Permanent Resident Card” (Form I-90) -> Live in canada and commute to work in US for the next 3 years (Windsor-Detroit) -> get the canadian citizenship after 3 years -> convert the “Commuter Permanent Resident Card” to regular Permanent resident card (Form I-90) and settle down in US -> Get the US citizenship after 5 years.
The advantage with this approach is that you earn in US dollars though you live in Canada during the first 3 years.
http://www.lanepowell.com/pressroom/pubs/pdfold/bc_2002_0005.pdf
This GC allows you to live in Canada/Mexico and commute to United States for work. Though you are loosing the year count towards US Citizenship with this GC, I think it’s a better option for anyone who wants to apply for citizenship in both countries.
(ie) Convert the regular Permanent resident card to “Commuter Permanent Resident Card” (Form I-90) -> Live in canada and commute to work in US for the next 3 years (Windsor-Detroit) -> get the canadian citizenship after 3 years -> convert the “Commuter Permanent Resident Card” to regular Permanent resident card (Form I-90) and settle down in US -> Get the US citizenship after 5 years.
The advantage with this approach is that you earn in US dollars though you live in Canada during the first 3 years.
more...
makeup Orchids and tropical flowers
wandmaker
01-02 12:57 PM
What is the exact reason for denial? In spite of your education evaluation as well as letter from the Registrar in India they still dont believe Maths was your major?
You should appeal. It can take a few months (4-6) but its not worth letting it go so easily. Try to get a better education evaluation done (try Sheila Danzig, she has helped some folks on immigrationportal.com). Also, ask your attorney why he is confident the appeal will work in your case (ie. what does he plan to present in the appeal that he did not include in the RFE response).
Also, start another LC in parallel if you are about to run out of your 6 years on H1, as a backup (you can get H1 extensions based on this LC while its under appeal, but if the appeal is also ultimately denied, you want to keep your options open)
I was about write the same, good advice.
You should appeal. It can take a few months (4-6) but its not worth letting it go so easily. Try to get a better education evaluation done (try Sheila Danzig, she has helped some folks on immigrationportal.com). Also, ask your attorney why he is confident the appeal will work in your case (ie. what does he plan to present in the appeal that he did not include in the RFE response).
Also, start another LC in parallel if you are about to run out of your 6 years on H1, as a backup (you can get H1 extensions based on this LC while its under appeal, but if the appeal is also ultimately denied, you want to keep your options open)
I was about write the same, good advice.
girlfriend Free Orchid Wallpapers - Enjoy
eb3retro
05-14 10:46 PM
I already contributed after hearing the news that my pd is current.
http://immigrationvoice.org/forum/showthread.php?p=63110#post63110
Will continue to contribute in future.
http://immigrationvoice.org/forum/showthread.php?p=63110#post63110
Will continue to contribute in future.
hairstyles Orchid Wallpaper Large
Aah_GC
06-20 02:19 PM
The problem is AC21 is speculative rather than definitive. You can give it your own interpretation as USCIS has not come forward with a good distinction between same and similar.
When you are at the fork of the road, the path of least resistance to GC is a sensible one, that is when you don't have the fear of not getting your GC. It is ultimately up to each one of us.
When you are at the fork of the road, the path of least resistance to GC is a sensible one, that is when you don't have the fear of not getting your GC. It is ultimately up to each one of us.
Rockford
07-17 02:54 PM
we really have to be morons to take anynonymous comments at face-value.
or did you post the comments yourself and like the attention?
Then every one has to be moron to participate in this forum. Most ,if not all, are anonymous here too. You take them what for what they are worth...
or did you post the comments yourself and like the attention?
Then every one has to be moron to participate in this forum. Most ,if not all, are anonymous here too. You take them what for what they are worth...
indianindian2006
02-17 10:59 AM
Well, no other sites have posted this. Murthy, AILA etc. so its difficult establishing credibility. Also, dont you find it strange that he says EB3 India wont move? It has been at 2001 since long time (excluding anomalies). If that wont move this year when will it move. Are there so many eb3s ? especially with ppl porting to eb2s?
The reason for only him reporting so far could be that it was a Southern California chapter meeting and he is the local attorney out there.
The reason for only him reporting so far could be that it was a Southern California chapter meeting and he is the local attorney out there.
No comments:
Post a Comment